21-jan-11 specification 3 watts ? single & dual output ? sip package ? 1000 vdc isolation ? optional 3000 vdc isolation ? 40 c to +85 c operation ? semiregulated ? 3 year warranty ir series input input voltage range ? nominal 10% input reflected ? 20 ma pk-pk, 5 hz to 20 mhz ripple current input reverse voltage ? none protection output output voltage ? see table minimum load ? none (1) line regulation ? 1.2%/1% ? vin load regulation ? see table setpoint accuracy ? +2%, -4% ripple & noise ? 50 mv pk-pk max, 20 mhz bandwidth (2) temperature coefficient ? 0.02%/c maximum capacitive ? see table load general efficiency ? see table isolation voltage ? 1000 vdc minimum, 3000 vdc option (3) isolation resistance ? 10 9 ? isolation capacitance ? 60 pf typical switching frequency ? variable, 60 khz -85 khz mtbf ? >1.1 mhrs to mil-hdbk-217f at 25 c, gb environmental operating temperature ? -40 c to +85 c storage temperature ? -40 c to +125 c case temperature ? 100 c max cooling ? convection-cooled xppower.com input voltage no load input current output voltage output current max capacitive load efficiency load reg. model number 5 vdc 80 ma 5.0 v 600 ma 220 f 79% 8.0% IR0505Sa ?^ 70 ma 9.0 v 333 ma 220 f 84% 7.0% ir0509sa ?^ 70 ma 12.0 v 250 ma 100 f 84% 6.0% ir0512sa ?^ 80 ma 15.0 v 200 ma 100 f 84% 6.0% ir0515sa ?^ 80 ma 5.0 v 300 ma 100 f 82% 7.0% IR0505S ?^ 70 ma 9.0 v 167 ma 100 f 85% 6.0% ir0509s ?^ 70 ma 12.0 v 125 ma 47 f 85% 6.0% ir0512s ?^ 70 ma 15.0 v 100 ma 47 f 86% 5.0% ir0515s ?^ 12 vdc 25 ma 5.0 v 600 ma 220 f 84% 6.0% ir1205sa ?^ 25 ma 9.0 v 333 ma 220 f 87% 4.0% ir1209sa ?^ 25 ma 12.0 v 250 ma 100 f 88% 4.0% ir1212sa ?^ 20 ma 15.0 v 200 ma 100 f 90% 3.0% ir1215sa ?^ 25 ma 5.0 v 300 ma 100 f 85% 5.0% ir1205s ?^ 25 ma 9.0 v 167 ma 100 f 88% 4.0% ir1209s ?^ 25 ma 12.0 v 125 ma 47 f 89% 3.0% ir1212s ?^ 20 ma 15.0 v 100 ma 47 f 90% 3.0% ir1215s ?^ mechanical details 0.12 (3.05) 0.10 (2.54) 0.37 (9.50) 0.28 (7.20) 0.05 (1.25) 0.02 (0.50) 0.60 (15.24) 0.76 (19.50) 0.28 (7.20) 0.39 (10.0) 0.02 (0.50) 0.02 (0.50) 12 4567 0.01 (0.25) 1. operation at no load will not damage unit but it may not meet all specifications. 2. output capacitor of 1 f required to meet quoted ripple and noise. 3. for optional 3 kv isolation, add suffix -h to the model number. 4. all dimensions in inches (mm). 5. pin pitch tolerance: 0.014 (0.35) 6. case tolerance: 0.02 (0.5) 7. weight: 0.006 lbs (2.8 g) notes pin connections pin single dual single-h dual-h 1 +vin +vin +vin +vin 2 -vin -vin -vin -vin 4 -vout -vout n.p n.p 5 n.p common -vout -vout 6 +vout +vout n.p common 7 n.p n.p +vout +vout dcdc ? available from farnell & element14. see pages 284-290. ^ available from newark. see pages 291-296.
|
